Description of parameters – Trading Systems – 28 February 2022
License key number. Generated automatically at the time of payment for the product. After payment, a link to a personal page with a key will be sent to your email. Also, you can always see the key number on this site in your personal account. The key is generated based on your name. Thus, you
License key number. Generated automatically at the time of payment for the product. After payment, a link to a personal page with a key will be sent to your email. Also, you can always see the key number on this site in your personal account. The key is generated based on your name.
Thus, you can use the purchased adviser on any account issued in your name. The Expert Advisor cannot be used on demo accounts, as demo accounts can be opened in any name. To test strategies in real market conditions without risk, use cent accounts. When buying this Expert Advisor in the MQL5 market, this parameter is inactive and can take any value.
Used during Expert Advisor optimization. During the optimization of the Expert Advisor, its separate copy is launched on a real-time chart with the Accountant parameter enabled. As a result, the robot will display on the graph the number of optimized files in each created folder, and opposite the number of days – the oldest file.
The number of rows in each individual column. The number must be specified taking into account the resolution of your monitor. The more rows in each column, the more of them will fit on the graph.
Table font size in Accountant mode. It is set depending on the monitor resolution and computer settings.
Sandbox folder where files are saved during optimization before they are transferred to the main folder. Before transferring the settings files, you can check for stability and only then transfer the settings files to the main folder. To transfer it is necessary to press the button (Moving) on the chart (the button is located in the lower right corner of the chart). Provided that an Expert Advisor in (Accountant) mode is installed on the chart.
Delete all files from the main folder before transferring files from the sandbox to it. This is necessary if you want to exclude the possibility that some files that were previously used will remain and will not be updated due to changes in the strategy, currency pairs, period and other criteria.
In the case of direct recalculation (Straight), the function allows you to determine which trading instruments of those that the broker has are not in the list of the adviser. When recalculating (Back), on the contrary, the function determines which trading instruments from those that are on your list are not available from the broker.
Confirmation of actions in case of moving or deleting files using the buttons from the chart. Disabling may be needed in case of speeding up the process.
If enabled, the optimized currency pair will be displayed on the left side of the chart during the optimization of the Expert Advisor. This is necessary solely for the visualization of the process, there is no need for this.
Trading with automatic loading of settings from the server. In this case, the robot is launched on only one chart, and trading will be carried out in a multi-currency mode on a variety of currency pairs and with different periods. The robot will determine the number of pairs automatically according to the loaded settings. Typically, 10 to 30 currency pairs are used. At the same time, the robot does not allow deposit overload and can trade with an amount of $100 or more.
If LocalFolder the robot will try to load files with settings from the local folder of the terminal otherwise from the shared folder of all terminals. During testing and optimization, the robot has access only to the shared folder of all terminals.
Sending files with settings to the server (for example, the server of your site, you must first configure the terminal to send files via FTP protocol with a login and password) for subsequent download by an adviser from anywhere in the world (you must first specify the address of your server in the terminal settings). Files are sent at the time of loading the adviser and every 24 hours. This may be necessary if you are optimizing on your computer, and trading is carried out on a VPS, from where the robot will independently download the latest settings from your site, the restart is also carried out every 24 hours. Any person can download files with settings from your site, for this it will be enough to specify the address of your server in the terminal settings.
Trims the names of folders with files. This may be necessary when, according to the rules of some servers, the name of folders with files cannot exceed a certain number of characters.
If you turn on the robot will work in turbo mode. Such work involves bypassing all available files in different folders, the number of folders can reach up to 200. In this mode, the robot is able to open a huge number of transactions, depending on other settings.
The maximum number of positions in the terminal for all instruments.
Comments about the state of the trading process. It is better not to turn it off, in the case of using strategies that require maximum data processing speed, information is updated only at opening prices.
Loading settings from the server. Naturally, files with settings must first be uploaded to the server. This is done using the FTP protocol (you must first configure the terminal with the login and password of the FTP server). By default, the address of our server is indicated, but you can change it to your own.
The number of repetitions of the cycle of loading files with settings. In case of an unsuccessful attempt due to bad internet. If greater than 0, the cycles are repeated as control, even if the previous ones were successful. In the case of repeated cycles, this process takes longer, but the guarantee that all files will be downloaded increases significantly. The next process of reloading files with settings, regardless of the result, will be completed in a day.
Specifies the number of folders when downloading files from the server, or sending them to the server (sending files is mainly done by leaders, professional traders who want to share their settings with other users, or for their own convenience). It is necessary to determine the number of folders when files with settings are loaded with the turbo mode enabled, where the EA uses several folders with files at once. 1 – will mean only one folder, the first in turn, 2 – two folders and so on. Typically, 10 folders (sets) are used on average in turbo mode. The maximum number is 200 folders.
Search for symbols available for download, among those offered by the broker, or among those specified in the parameters of the adviser. Local search significantly reduces the time it takes to enumerate characters.
Periods available for download, all existing in the terminal, or a specific period. If you select PERIOD_CURRENT, all periods will be searched, otherwise a certain period (search time is significantly reduced).
URL address of the server from which the settings will be loaded. The default address is our address, but you can change it to your own. Upload settings to your server and conduct completely independent trading. One of the most powerful systems of this Expert Advisor is fully automatic optimization and uploading of settings to the server (via FTP), after which these settings are also automatically loaded by this robot from anywhere in the world.
Server name of your broker. If you leave the field empty, the robot will read the name of your broker’s server otherwise ServerName. It is necessary to fill in the field if you use the settings obtained in a foreign trading environment (for example, ours) where the server name is necessarily taken into account.
File folder number. This number allows you to find the folder with files you need on the server and upload these files to the robot code. If this number is entered incorrectly, the robot will either download the wrong folder with files, or will not download anything due to its absence. Initially, this number is set during the optimization of the Expert Advisor, and the same number is subsequently used to find these files.
The ID of the EA’s positions as well as the initial number of subfolders located in the folder with the number ForderNumber. During optimization, subfolders receive difference numbers, where the starting number is exactly Magic_Number, all subsequent folders have numbers in ascending order by one digit. Magic_Number is also directly involved in searching for files inside the folder with the ForderNumber number. Initially set during Expert Advisor optimization.
If enabled, the robot will change the position identifiers so that they do not repeat based on the Magic_Number parameter and the sequence number of the location of each individual file. Let Magic_Number = 1 with subsequent recalculation (1)1,(1)2,(1)3,(1)4,(1)5,(1)6,(1)7,(1)8,(1) 9,(1)10,(1)11,(1)12,(1)13,(1)14,(1)15,(1)16,(1)17,(1)18,(1) 19,(1)20 and so on. Normal recalculation with the addition of Magic_Number as a prefix. Thus, if the number of Magic_Number differs, the numbers in the recalculation will never be repeated when using several copies of the adviser within the same terminal.
However, if the TotalPass parameter is used during the optimization of the Expert Advisor, then in this case the ordering of the files is not respected, and as a result of the next optimization, the robot will simply lose control over a number of open positions. Therefore, the DifferentMagic and TotalPass options are incompatible. You need to choose which of the options is more important to you and disable the second one. To disable TotalPass, it must be set to zero.
If greater than 0, then the adviser will trade only if the amount of funds allocated to him for trading equals or exceeds this value, otherwise trading is suspended until the deposit is replenished. If 0 then not used.
the number of currency pairs that can be traded simultaneously;
Several orders can be opened in one series for one currency. The robot counts the number of currency pairs for which positions are open. This is necessary in order to prevent an overload of the deposit. Let’s say 2 positions are open for EURUSD and 3 positions for GBPUSD, the robot will give a value of – 2. This means that there are 2 currency pairs in total.
If several copies of the Expert Advisor work within the same terminal, you can turn off this parameter so that the positions opened by different copies of the Expert Advisor are counted separately, taking into account the ID of ExpertNumber copies of the Expert Advisor. Otherwise, all positions in the terminal will be counted together.
This is a very useful feature that identifies all positions based on friend-foe principle. If you accidentally or intentionally change the settings of the Expert Advisor with open positions, as a result of which the robot will no longer recognize and control some positions in the terminal (this can happen if you change parameters such as ExpertNumber, MagicNumber or currency pairs with open positions), the robot will detect these positions as someone else’s , will display their number on the chart in red and wait for them to close. Until the uncontrolled positions are closed, the robot will not trade.
The number of positions in one pair after which trading in other pairs will be prohibited. If the number of positions in a series for one currency pair exceeds this value, trading in other pairs will be suspended until the drawdown series closes.
Drawdown for all pairs after which trading in other pairs will be prohibited. The total drawdown of the deposit, at which the opening of new positions (except for averaging ones) is suspended.
If enabled, the robot will not open opposite positions.
Buy_Sell – buy and sell market positions, Buy_Sell_Stop – pending positions for a market breakout, Buy_Sell_Limit – pending positions for a market breakout.
Distance from the current price in points from which pending orders are placed. OrderTime – pending orders expiration time in minutes, 11 minutes+OrderTime. If 0 then orders will be placed with the minimum possible time of 11 minutes. However, the EA has an additional built-in function that allows you to delete pending orders forcibly after OrderTime (minimum 1 minute). The difference between the forced deletion of orders by the adviser and the established one is that at the set time, orders are deleted by the broker even when the terminal is closed.
If more than 0, the balance will be virtual, otherwise the real balance is taken. It is used for calculating the lot and early closing of all positions in case of using the loss limit function. This is necessary in cases where you do not want to risk your entire balance, but only some part of it, or several copies of the adviser work on one account and a certain part of the funds is allocated for each copy.
Early closing of all positions in the terminal, for all currency pairs, without taking into account the position identifier sMagicNumber with the ExpertNumber number. ExpertNumber is written in comments to positions.
Profit/loss for the time specified here for all positions with ExpertNumber. The time is counted in days from the current date. If it is equal to 30, it means that the data will be calculated only for the last 30 days. The resulting value is added to the fixed amount of the VirtualAccountBalance. If 0 then not used.
The percentage (of the virtual/real balance) of drawdown at which all positions in the terminal with ExpertNumber number will be closed ahead of schedule. If the UseBalanceStopAll flag is off, then it is not used. Expert_Number – Expert Advisor ID. If several copies are running within the same terminal, this number must be different for each individual copy. This is necessary in order for the adviser to be able to distinguish positions on the principle of friend or foe.
If more than 0 lot depending on the balance otherwise Lot
For every 0.01 – a fixed lot, $100 (high risk), $500 (medium risk), $1000 (low risk).
Multiplication factor of the lot of averaging positions.
Maximum allowable lot.
Maximum allowable spread.
Maximum allowable slip.
If enabled, virtual stop loss and take profit will be used (stored in the EA’s memory and not transferred to the server).
Market take profit if 0 is not used.
Market stop loss if 0 is not used.
Loss limiter as a percentage of the deposit. If the drawdown exceeds this value, all positions with Expert_Number EA ID will be forced to close.
Depth of history for automatic calculation of the distance between positions.
The maximum number of positions.
Maximum lifetime of positions.
Trading pauses before news releases.
Trading pause before news release in minutes.
Trading pause after news release in minutes.
Consider news of the least importance.
Consider news of medium importance.
Consider news of the greatest importance.
Closing positions before news release.
Automatic time shift.
Time shift.
If you turn it off, the time parameters will not be set automatically during optimization. During optimization, such values as start, step, stop are set automatically, but with the help of a flag.
You can turn off automatic optimization of the time range, and set the time as fixed – in the external parameters of the adviser.
At the same time, it should be borne in mind that until the moment when the values of at least one parameter inside the adviser code are set in automatic mode, the external settings for the start, step, stop values are not active. If you want to set these values yourself, you must disable the fully automatic setting of optimization values using the SetDefault flag.
In this case, full control over the optimization processes will be transferred to you and the strategy tester will be required to set the appropriate values for at least one parameter during optimization.
Trading start time.
Trade end time.
Trade on Wednesday (triple swap day);
Trade on Friday (before the market closes).
automatic time shift relative to GMT.
The function is disabled.
The current deviation of the broker’s time relative to GMT.
Manual time shift. It is best to trade with the broker on whose quotes the adviser is being optimized. This eliminates any confusion, in this case GMTAuto=false, GMTDifer=0, this is due to the fact that the MT5 terminal downloads quotes according to the broker’s time.
If you use these settings in a foreign trading environment, then GMT must be shifted relative to the broker on whose quotes it was optimized.
For example, the robot is optimized on RoboForex quotes, the RoboForex broker has 17.00 at the moment, and the “UNKNOWN” broker has 20.00 at the moment, which means that the adviser’s time must be shifted 3 hours back in such a way as to fit it to the server time of the RoboForex broker.
From all this it follows that you need to adjust the time of the adviser for the broker on whose quotes it was optimized.
Trawl positions
Trawl start;
Stop trawl.
indicator period.
Micro trend direction.
Return signal.
Automatic setting of start, step, stop values during optimization.
Trend indicator.
If enabled, the robot will trade on price rollbacks from the main trend, otherwise strictly following the trend. It is preferable to trade precisely on price rollbacks from the main trend, since the probability of price rollbacks is quite high and in the event of a trend reversal, the probability of opening against the global trend decreases.
However, the EA has a lot of strategies that do not fit well with counter-trend calculation systems. You can easily determine this in the strategy tester by the number of transactions that are very much reduced. In this case, you can turn off UseTrendRoll and work exclusively with the trend.
Used in case of automatic setting of SetDefault optimization values. You can change their enumeration range. On large periods, the range should be larger, on small periods, M1, M2, and so on, the range can be reduced. This largely depends on the number of transactions. If you set a large search range on a small period, then the number of transactions can be reduced to a complete blockade.
Choice of strategy (strategies will be added):
- iInd0Param0 – value of the first parameter, below are a number of parameters,
- Ind0Param1,
- Ind0Param2,
- Ind0Param3,
- Ind0Param4,
- Ind0Param5,
- Ind0Param6,
- Ind0Param7,
- ind0Param8,
- Ind0Param9,
- Ind0Param10,
- Ind0Param11,
- Ind0Param12,
- Ind0Param13,
- Ind0Param14,
- Ind0Param15.
Strategies – choice of strategy (strategies will be added):
- Ind1Param1 – value of the first parameter, below are a number of parameters,
- Ind1Param2,
- Ind1Param3,
- Ind1Param4,
- Ind1Param5,
- Ind1Param6,
- Ind1Param7,
- ind1Param8,
- Ind1Param9,
- Ind1Param10,
- Ind1Param11,
- Ind1Param12,
- Ind1Param13,
- Ind1Param14.
The number of folders with files, if 0 then the settings will not be saved. During optimization, the EA analyzes the results of each pass in the strategy tester and saves the settings with the best results in separate files. Files with settings (including currency pair and chart period) are saved in a separate folder.
However, according to the results of optimization, positive results can be achieved with different settings, and no one knows which settings will be the most effective in real market conditions. Therefore, it makes sense to save at least several combinations of settings, which can later be used on several accounts at once by distributing funds between them. In this way risk diversification is achieved. While we can make a loss on one account, a profit is achieved on another account.
In order to automate the process of saving settings in different variations, it is enough to increase the value of the MultiLevelRecording parameter (abbreviated name – MLR) by the desired amount. As a result, after saving the settings in one folder (for a certain currency pair with a certain chart period), the EA will create a new folder for the next variation, increasing its number by one.
The main folder number is the FolderNumber parameter, which contains all subfolders with a Magic_Number starting number. All subsequent folders have numbers – (Magic_Number + serial number of creation). The number of each subsequent folder exceeds the previous one by one multiple (one digit).
Includes the total number of bars to optimize. This value is used to set the start optimization date, which is determined differently for the same number of bars for different periods. So let’s say with a period of H1 18000 bars, this is a little more than 2 years of optimization. However, when setting a smaller period, the optimization time is reduced in proportion to the period of the chart.
This is absolutely conditional, considering how long it can take to optimize an Expert Advisor for 2 years with a period of M1. This is a huge number of bars that you need to go through with each pass. The number of passes can be in the thousands.
This calculation saves us from having to shift the time in the strategy tester every time depending on the chart period. In addition, it must not only be shifted, it must be calculated, and all this complicates the work. So this simple function greatly simplifies the optimization process.
The only drawback of this function compared to manually setting the optimization date in the strategy tester is the constant need to idle the extra time set in the strategy tester. For example, in the strategy tester, the set time interval takes 2 years, and according to the internal settings of the EA for 18,000 bars with a period of M1, the time interval is set much less, and with each pass, the EA is forced to go through an extra section in idle, which takes some time. This affects exclusively and only the total optimization time, it does not affect the quality of optimization in any way.
All this is subject to optimization at opening prices. Where in one and the same moment, a period of both one hour (H1) and one minute (M1) can be passed.
Optimization start time (set manually) if AutoStartTime = 0. This is a drop-down block where you can set any optimization start date.
This is a very important parameter that determines the optimization method. If 0, the optimization will be measured, if it is greater than 0, then it will not be measured. Let’s say you optimize 28 pairs in 10 variations. First, the robot will select the settings for one pair and fill 10 folders with different settings, then move on to the next pair and so on. However, in the case of measured optimization, if the robot cannot find suitable settings for a certain pair according to your criteria, it will continue to search for them until the strategy tester exhausts all combinations and stops, after which the strategy tester will need to be restarted and everything can repeat itself again.
In the case of using non-dimensional optimization, the robot will select settings for a certain currency pair only for a certain number of TotalPass passes and then switch to the next pair and so on. After it reaches the end of the list of currency pairs, it goes back to the first pair and so on in a circle.
In the first option, the advantage is that in all folders you will end up with the same number of optimized files, not counting the last optimized pair if the optimization for it was not completed as a result of stopping the strategy tester. The downside is that the robot can get stuck on some pair, unable to select settings for it according to your criteria and in the quantity you need. For this reason, optimization for the rest of the pairs is delayed.
In the second option, the advantage is the complete absence of looping on a certain pair, the robot switches from one pair to another all the time, however, folders with files are not filled in this way. In the first folder, as a rule, there will be the largest number of optimized files, in the second there may be a little less, and in the third even less, and so on, because the largest number of passes falls on the first folder, the rest on the second and subsequent folders. Optimization may not even reach the latter at once. Alignment of the number of files in folders occurs only after filling the first folders, in this case, the championship is transferred further and so on until the outermost folder.
If enabled, the settings with the best results will only be saved during automatic forward testing, which can be used in the MT5 strategy tester. While the EA is being optimized, the robot will ignore all the results and will start analyzing the results and choosing the best settings only after the optimization is completed and automatic forward testing has begun.
If enabled, the adviser will select settings only during testing. Settings are selected in accordance with all specified criteria. However, not all settings are sorted in a row, as during optimization, but only those that you select manually (after the optimization is complete) and run in the strategy tester in testing mode.
The EA is optimized in multi-currency mode, here you can specify the number of currency pairs to be optimized. Currency pairs are not optimized simultaneously, but one by one. First, the adviser selects the settings for one pair, then for another, and so on.
If – 2 then all currency pairs from the list will be searched, – 1 only the current currency pair of the strategy tester, if 0 or more, a specific currency pair is selected from the list. 0 is the first pair in the list, 1 is the second pair, 2 is the third pair, and so on.
List of currency pairs
Forex
EURUSD/ USDJPY/ USDCHF/ GBPUSD/ USDCAD.
NZDUSD/ AUDUSD/ EURGBP/ EURCHF/ EURJPY.
AUDCAD/ CADJPY/ CADCHF/ AUDCHF/ AUDNZD.
EURCAD/ EURAUD/ NZDJPY/ EURNZD/ GBPJPY.
NZDCHF/ GBPNZD/ GBPCHF/ NZDCAD/ AUDJPY.
CHFJPY.
GBPAUD.
GBPCAD.
The list of currency pairs is compiled solely for optimization in the strategy tester. When running the Expert Advisor on a real-time chart, currency pairs are read from files that are created during optimization. You can change this list as you wish, it is obligatory to have an appropriate separator between the tools in the form of a forward slash ( / ).
The number of currency pairs and other instruments that you trade can reach 200 items. The EA includes quite a powerful potential, however, your broker will hardly have such a number of traded instruments. At the same time, tools must also be selected in accordance with the strategies that you use. Basically, no more than 28 currency pairs are used, which are registered by default.
Please note that the more currency pairs you use, the more you load the terminal and, accordingly, the computer / VPS. This creates a relatively acceptable load on a server of average power when running several terminals, however, if the server runs up to 10 terminals or more, you need to check whether your server is able to cope with such a load.
If the server cannot cope with the load, the Expert Advisors will be forcibly unloaded from the terminals by means of the server. It will be very inopportune in the presence of open positions, but not critical, when the robots return to the charts, they will unmistakably find their positions and continue to control them.
With this option, you can test a specific settings file from a shared folder. 0 is the first file, 1 is the second file, 2 is the third file, and so on. This allows you to subject files with settings to an additional check separately, to identify and exclude files that weaken the overall result. Such files must be deleted from the shared folder manually. To do this, go along the path – AppData Roaming MetaQuotes Terminal Common Files (common folder with Expert Advisor files), find unnecessary (at your discretion) files with settings and delete them.
For the Expert Advisor to work, it is necessary that there is at least one file in the shared folder, a maximum of 200 files. Each file can include different settings, different chart periods, different currency pairs, or completely different strategies.
This is protection against accidental clicks in the strategy tester, as a result of which the tester can start and overwrite/delete obsolete files that may still be quite suitable for trading (according to the results of trading, some sets with settings may show outstanding results). To prevent this, you can protect individual file folders from any changes. To do this, write down their numbers here separated by a slash.
Profit in hard currency, below which settings are not accepted.
Relative drawdown above which settings are not accepted.
Profit factor, below which settings are not accepted.
Math expectation, below which settings are not accepted.
Custom settings acceptance criteria in the form of a drop-down list. Select the criterion that you think the result of the acceptability of the settings should meet. All results that do not meet this criterion will be automatically cut off:
- Initial deposit – initial deposit value.
- Withdrawal – the amount of funds withdrawn from the account.
- Profit – net profit at the end of testing.
- Gross profit – total profit, the sum of all profitable (positive) trades. The value is greater than or equal to zero.
- Gross loss – total loss, the sum of all unprofitable (negative) trades. The value is less than or equal to zero.
- Maximal profit trade – maximum profit – the highest value among all profitable trades. value is greater than or equal to zero.
- Maximal loss trade – maximum loss – the smallest value among all unprofitable trades. value less than or equal to zero
- Maximal consecutive profit – maximum profit in a sequence of profitable trades. The value is greater than or equal to zero.
- Maximal consecutive wins – the total profit in the longest series of profitable trades.
- Maximal consecutive loss – the total loss in the longest series of losing trades.
- Maximal consecutive losses – the number of trades in the longest series of losing trades.
- minimal balance – minimum balance value.
- Maximal balance drawdown – maximum balance drawdown in money. In the process of trading, the balance can experience many drawdowns, the largest value is taken.
- Balance drawdown percent – balance drawdown in percent, which was fixed at the moment of the maximum drawdown of the balance in money.
- Maximal relative balance drawdown – maximum balance drawdown in percent. In the process of trading, the balance can experience many drawdowns, for each drawdown, the relative value of the drawdown is fixed in percent. The largest value is returned.
- Relative balance drawdown percent – balance drawdown in money, which was fixed at the moment of the maximum balance drawdown in percent.
- Minimal equity – minimum equity value.
- Maximal equity drawdown – maximum drawdown in money. In the process of trading, funds can experience many drawdowns, the largest value is taken.
- EquIty drawdown percent – drawdown in percent, which was fixed at the moment of the maximum drawdown of funds in money.
- Maximal relative equity drawdown – maximum drawdown in percent. In the process of trading, funds can experience many drawdowns, for each drawdown, the relative value of the drawdown is fixed in percent. The largest value is returned.
- Relative equity drawdown percent – drawdown in money, which was fixed at the moment of the maximum drawdown in percent.
- Expected payoff – expected payoff.
- Profit factor – profitability.
- Recovery factor – recovery factor.
- Sharpe ratio – Sharpe ratio.
- Minimal margin level – minimum margin level reached.
- On tester result – the value of the calculated custom optimization criterion.
- Deals – the number of completed deals.
- Trades – number of trades.
- Profit trades – profitable trades.
- Loss trades – losing trades.
- Short trades – short trades.
- Long trades – long trades.
- Profit short trades – short profitable trades.
- Profit long trades – long profitable trades.
- Trades of maximal consecutive profit – trades with maximum consecutive profit.
- Maximal consecutive wins count – the maximum number of wins in a row.
- Trades of maximal consecutive loss – trades with the maximum continuous loss.
- Maximal consecutive losses count – the maximum number of consecutive losses.
- Average consecutive wins – the average length of a profitable series of trades.
- Average consecutive losses – the average length of a losing series of trades.
More or less. Let’s say if you chose drawdown as a criterion, then this flag should be set to the position less (the smaller the drawdown, the better). And if the profit factor criterion is chosen, then naturally it is more (the more the profit factor, the better).
The minimum/maximum value of the criterion at which settings are accepted.
Forward testing. If enabled, the EA will conduct forward testing directly during optimization, regardless of what is carried out by the MT5 strategy tester. From the set date, blocks are included inside the adviser that calculate critically important indicators such as profit (fixed in the deposit currency), relative drawdown (in percent), profit factor and mathematical expectation.
Automatic setting of the start date for forward testing:
- 1/2 – 50%;
- 1/3 – 30%;
- 1/4 – 25%;
Custom – set by the user using the ForwardTime parameter;
- 1 month;
- 2 months;
- 3 months;
- 4 months;
- 5 months;
- 6 months;
- 7 months;
- 8 months;
- 9 months;
- 10 months;
- 11 months;
- 12 months.
The starting point is the current date of today, the end point is the set start date of the optimization AutoStartTime or StartTime, depending on which method is used. From this time section, the time period for forward testing is counted. It can be set both in a measured part and in a certain number of months from the current date.
Start forward testing if AutoForwardTime = 0.
Profit in the hard currency of the deposit at which the settings are accepted;
Relative drawdown as a percentage of the deposit within which the settings are accepted;
Profit factor at which settings are accepted.
Mathematical expectation at which the settings are accepted.
If enabled, the robot will delete files created more than MaxTimeFile days ago. The creation day is counted from the optimization completion date set in the strategy tester. This is necessary to automatically delete old files. Until the moment the files exist, they cannot be overwritten in the process of optimization or testing. These files must be deleted forcibly manually or automatically after a certain number of days. Also these files can be updated online by reloading them from the server.
The number of days during which the files will be considered suitable for trading. Upon expiration, the opening of the first positions is suspended, the opening of averaging positions continues, and so on until the closing of all series. Further, the adviser completely stops trading until the files are updated. If = 0 is not used.
Sending messages to your email. You must first configure the terminal to send mail. Not all messages are sent, but only a few critical ones.
Reducing the balance to the minimum allowable. The message will contain the account number, currency pair, and an arbitrary message (Message).
Expiration of files, the need to update files or extend their activity depending on the results of Checking activity status – periodic sending of messages with a PauseTime break that confirm the activity of the adviser.
Sending push messages to your mobile terminal. You must first configure the terminal to send messages.
Sound messages in the terminal.
Periodic sending of messages that will confirm the activity of the adviser. The absence of messages is the reason for checking the VPS server on which it will work.
If you enable the adviser, it will send you email messages about opening and closing deals. In addition to general information, the message will contain information about the total number of active transactions, the size of the balance and floating profit.
Arbitrary text, here you can enter the VPS IP or any other text that will allow you to quickly navigate.
Pause between messages in minutes.
| آموزش مجازی مدیریت عالی حرفه ای کسب و کار Post DBA + مدرک معتبر قابل ترجمه رسمی با مهر دادگستری و وزارت امور خارجه |  آموزش مجازی مدیریت عالی و حرفه ای کسب و کار DBA+ مدرک معتبر قابل ترجمه رسمی با مهر دادگستری و وزارت امور خارجه |  آموزش مجازی مدیریت کسب و کار MBA+ مدرک معتبر قابل ترجمه رسمی با مهر دادگستری و وزارت امور خارجه |
 مدیریت حرفه ای کافی شاپ |  حقوقدان خبره |  سرآشپز حرفه ای |
 آموزش مجازی تعمیرات موبایل |  آموزش مجازی ICDL مهارت های رایانه کار درجه یک و دو |  آموزش مجازی کارشناس معاملات املاک_ مشاور املاک |
برچسب ها :Description ، February ، parameters ، Systems ، Trading
- نظرات ارسال شده توسط شما، پس از تایید توسط مدیران سایت منتشر خواهد شد.
- نظراتی که حاوی تهمت یا افترا باشد منتشر نخواهد شد.
- نظراتی که به غیر از زبان فارسی یا غیر مرتبط با خبر باشد منتشر نخواهد شد.
ارسال نظر شما
مجموع نظرات : 0 در انتظار بررسی : 0 انتشار یافته : ۰